Etna Women's Heated Vest

Feel the warmth envelop you whenever you want

"Etna" is a lightly padded, electrically heated vest that gives you instant warmth at the touch of a button - when it suits you and without the need for layered clothing. This makes the vest a perfect garment in chilly weather, or when you take a break and need to stay warm between workouts.

"Etna" is form-fitting, body-hugging and hip-length, with stretch panels at the sides. The body-hugging fit and low weight make it both agile and easy to use.

"Etna" has an integrated electric heating system powered by an optional, portable power bank. The settings allow you to select, or switch, between three heat levels: low (45 °C), medium (50 °C) or high (55 °C).

The vest is fully lined with Welltex® technology, which gives it another advantage: the effect of reflected infrared energy - both from your own body heat and from the heat generated by the electric heating system.

The product is large in size, which makes it possible to wear a thicker sweater underneath. If, on the other hand, you want to wear it over only a thin layer of clothing and close to your body, go down a size.

NOTE: Power bank not included - 10,000 mAh recommended

• Fully lined with Welltex® technology
• Electric heating system
• Fast heating
• Lightweight and comfortable
• Zippered front pockets

• Electrically heated clothing
• Powered by optional power bank (not included)
• Requires an output power USB-C of at least 5V/2.1A (7500 mAh or 10000 mAh recommended)
• Three temperature levels: Low, Medium, High
  

1. Connect the USB-C cable to your power bank
2. Press and hold the LED control for three seconds to turn on the system.
3. Press the LED control for 1 sec. to switch between the settings (High/Medium/Low).
4. When the vest is not heat activated, it disengages from the battery in order to save battery power.  Battery must be turned back on to activate vest.

At one (1) long press, the "fast heating" function is activated. This will heat the vest to maximum temperature. The light flashes red in the meantime. During the quick warm-up (5 min) you can choose the heat level yourself by clicking through the options (red-white-blue). If you do not make an active choice, the heat will automatically switch down to a lower temperature (the middle position) after 5 minutes. The light is white.

Red LED light: Maximum heat
White LED light: Medium heat
Blue LED light: Lowest heat

To turn off, press and hold the LED control until the light turns off.

Shell: 100% Polyamide
Side panels: 95% Polyeste, 5% Elastane
Filling: 100% Polyester
Lining: 100% Polyester
Inner lining with Welltex®: 100% Polypropylene

1. Disconnect and remove battery.
2. Replace the small rubber cover to protect the USB-C connector
3. Close the battery pouch zipper
4. We recommend inserting the vest into a Mesh Laundry bag
5. No Dry Cleaning
6. Wash in a cold gentle cycle
7. Do not bleach
8. Line dry only
9. Do not iron

Safety Warning:

• The heating elements should not touch bare skin.
• Never use the product if the inside is wet.
• If discomfort occurs, turn off the product.

The product should be kept clean for maximum effect. The minerals that make up Welltex® have been infused into the material and cannot be washed out or worn off. Follow the washing instructions on the label for extended life and to preserve elasticity, texture and shape.